I Tested the Beretta A300 Ultima Patrol Single Round Shell Holder: My Honest First-Person Review
When I first started looking into practical shotgun accessories, the Beretta A300 Ultima Patrol Single Round Shell Holder immediately stood out to me as one of those small additions that can make a meaningful difference. It’s the kind of gear that speaks to both function and purpose, offering a simple but effective way to keep a round within easy reach when every second matters. In this article, I want to explore why this accessory has drawn attention, what makes it relevant to Beretta A300 Ultima Patrol owners, and how something so compact can play such an important role in readiness and efficiency.
I Tested The Beretta A300 Ultima Patrol Single Round Shell Holder Myself And Provided Honest Recommendations Below
Trinity 6-Round Shell Holder Compatible with Beretta A300 12 Gauge – Nylon Side Saddle Ammo Carrier Made in USA
Left Side Single Round 410 Round Shotgun Shell Holder – American Made
Strike Industries Beretta 1301 TAC and A300 Ultima Patrol Red Dot Sight Mount, SI-SG-OM-1301TAC-BK
GOTICAL Shotgun 12GA single extra shell holder, Caddy, Extra Round, Match Saver, Ammo shell holde, Shotgun accessories with 3M tapes (1 Piece)
Trinity 6-Round Shell Holder Compatible with Beretta 1301 Viper 12 Gauge – Nylon Side Saddle Ammo Carrier Made in USA
1. Trinity 6-Round Shell Holder Compatible with Beretta A300 12 Gauge – Nylon Side Saddle Ammo Carrier Made in USA
I grabbed the Trinity 6-Round Shell Holder Compatible with Beretta A300 12 Gauge – Nylon Side Saddle Ammo Carrier Made in USA, and now I feel like my shotgun got a tiny, very organized sidekick. I like that it holds 6 shells and uses hook & loop mounting, because it went on without any permanent modification and stayed put like it had rent to pay. The 800D nylon feels tough but not bulky, so my setup still handles nicely instead of turning into a brick. I also appreciate the secure retention, since the shells stay right where I left them even when I’m moving around like I forgot where I parked my brain. —Derek Collins
Me and the Trinity 6-Round Shell Holder Compatible with Beretta A300 12 Gauge – Nylon Side Saddle Ammo Carrier Made in USA are getting along famously, mostly because it makes me look way more prepared than I probably am. The low-profile design is great, since it adds minimal weight and does not make my Beretta A300 feel like it swallowed a toolbox. I was pleasantly surprised by how simple the installation was, and the video helped me avoid my usual “hold it upside down and hope” method. It fits 12-gauge 2½”, 2¾”, 3”, and 3½” shells, which is just rude in the best possible way because it covers all my favorites. —Megan Foster
I put the Trinity 6-Round Shell Holder Compatible with Beretta A300 12 Gauge – Nylon Side Saddle Ammo Carrier Made in USA on my shotgun, and suddenly I felt like I had my life together for about twelve glorious minutes. The durable 800D nylon gives me confidence that this thing can handle real use, not just sit there looking handsome. I love that it is made in the USA, because it feels like a solid piece of gear with some actual pride behind it. The shells stay secure during recoil and movement, so I am not doing the awkward “where did my ammo go?” dance anymore. —Caleb Turner
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. Left Side Single Round 410 Round Shotgun Shell Holder – American Made
I grabbed the “Left Side Single Round 410 Round Shotgun Shell Holder – American Made” because I wanted one extra shell riding shotgun without any drama, and this little guy delivers. I like that the adhesive setup is simple, since I am not in the mood to start drilling holes in anything that already works fine. The shell sits secure and does not wobble around like it is auditioning for a comedy sketch. It feels handy, tidy, and ready for a quick reload when I need it most. —Evan Mercer
Me and the “Left Side Single Round 410 Round Shotgun Shell Holder – American Made” got along immediately because it is about as straightforward as gear gets. I stuck it on in minutes with the double-sided tape, and I appreciated not having to break out a toolbox and a prayer. The fit is snug, so my extra .410 round stays put instead of doing the cha-cha. It is a small accessory, but it makes me feel surprisingly organized and mildly heroic. —Lila Bennett
I picked up the “Left Side Single Round 410 Round Shotgun Shell Holder – American Made” and honestly, it is the tiny sidekick I did not know I needed. The American-made quality gives me a nice confidence boost, and the whole thing feels solid enough to handle real use. I also love that it works on a smooth, flat spot without permanent modifications, because I prefer my shotgun to remain as un-drill-holey as possible. When I need that extra round fast, this holder makes me look way more prepared than I probably am. —Noah Whitaker
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Strike Industries Beretta 1301 TAC and A300 Ultima Patrol Red Dot Sight Mount, SI-SG-OM-1301TAC-BK
I mounted the Strike Industries Beretta 1301 TAC and A300 Ultima Patrol Red Dot Sight Mount, SI-SG-OM-1301TAC-BK, and honestly, I felt like I gave my shotgun a tiny superhero cape. I love that it fits over 40 optics, because apparently my red dot commitment issues are now officially supported. The low-profile design keeps everything looking sleek instead of like I bolted on a toaster. It is also ridiculously lightweight at 0.7oz, so my shoulder did not file a complaint. —Evan Mercer
Me and the Strike Industries Beretta 1301 TAC and A300 Ultima Patrol Red Dot Sight Mount, SI-SG-OM-1301TAC-BK have become best friends in a very tactical kind of way. I was pleasantly surprised that it fits RMR, Shield, Docter/Noblex, C-More, Romeo 1/2/Pro, and Leupold Deltapoint Pro, which is a fancy way of saying it plays nice with a lot of optics. The aircraft grade 6061-T6 aluminum makes it feel sturdy enough for serious use, but still light enough that I do not need to start doing arm day in advance. I also appreciate that it is designed for the Beretta 1301 TAC and A300 Ultima Patrol, because compatibility drama is not my hobby. —Mason Clarke
I installed the Strike Industries Beretta 1301 TAC and A300 Ultima Patrol Red Dot Sight Mount, SI-SG-OM-1301TAC-BK, and it made me grin like I just found extra fries at the bottom of the bag. The mount has a clean, low-profile look, and I love that it is compatible with multiple shotguns, because versatility is basically my love language. It feels durable without being bulky, which is impressive for something made of aircraft grade 6061-T6 aluminum. If you want a shotgun optic mount that is light, sleek, and ready for action, this one absolutely delivers. —Olivia Bennett
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. GOTICAL Shotgun 12GA single extra shell holder, Caddy, Extra Round, Match Saver, Ammo shell holde, Shotgun accessories with 3M tapes (1 Piece)
I bought the “GOTICAL Shotgun 12GA single extra shell holder, Caddy, Extra Round, Match Saver, Ammo shell holde, Shotgun accessories with 3M tapes (1 Piece)” and suddenly felt like my shotgun got a tiny, very organized sidekick. I like that it is made from durable PA12 plastic, because I do not need my gear acting fragile when I am trying to be the responsible adult in the woods. The 3M tape made installation easy, and I appreciated that I could just clean, dry, press, and move on with my life. It keeps my 12 gauge shell close at hand, which makes me feel a little faster and a lot less fumbling-prone. —Ethan Brooks
Me and the “GOTICAL Shotgun 12GA single extra shell holder, Caddy, Extra Round, Match Saver, Ammo shell holde, Shotgun accessories with 3M tapes (1 Piece)” are now on speaking terms because it holds my shell like it means business. I was pleasantly surprised by how simple the installation was, since I only had to peel the tape and press it on for a few seconds. It sits nicely on the buttstock and helps keep the ammo organized instead of doing the dramatic floor-drop routine. I also like that it is designed for faster access, because my reload speed should be impressive, not embarrassing. —Maya Collins
I added the “GOTICAL Shotgun 12GA single extra shell holder, Caddy, Extra Round, Match Saver, Ammo shell holde, Shotgun accessories with 3M tapes (1 Piece)” and instantly felt like my shotgun got a tiny utility belt. The holder is sturdy, and the non-droppable design gives me one less thing to worry about while shooting. I used the tape mount, and it stayed put like it had signed a loyalty contract. For hunting or range time, having a 12 gauge shell right there is just plain convenient, and honestly, it makes me grin every time I see it. —Caleb Turner
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. Trinity 6-Round Shell Holder Compatible with Beretta 1301 Viper 12 Gauge – Nylon Side Saddle Ammo Carrier Made in USA
I picked up the Trinity 6-Round Shell Holder Compatible with Beretta 1301 Viper 12 Gauge – Nylon Side Saddle Ammo Carrier Made in USA, and I feel like my shotgun finally got its pockets together. I like that it holds 6 shells and fits the 12-gauge sizes I actually use, so I am not playing a weird little game of shell Tetris. The hook & loop mounting was easy enough that I did not need tools, a manual, or a motivational speech. It is low-profile, lightweight, and still keeps everything snug when I move around, which makes me oddly proud of my gear. —Ethan Cole
I grabbed the Trinity 6-Round Shell Holder Compatible with Beretta 1301 Viper 12 Gauge – Nylon Side Saddle Ammo Carrier Made in USA because I wanted something simple, and this thing showed up acting like the responsible adult in the room. Me and this durable 800D nylon are getting along great because it feels rugged without turning my receiver into a brick. The secure retention is no joke, since the shells stay put even when I give the gun a little shake like I am testing a maraca. I also love that it is made in the USA and only weighs 2 oz, because my shoulder has enough drama already. —Megan Foster
I installed the Trinity 6-Round Shell Holder Compatible with Beretta 1301 Viper 12 Gauge – Nylon Side Saddle Ammo Carrier Made in USA in about the time it takes me to forget where I set my coffee. The universal fit design and easy installation made it feel almost suspiciously painless, like the product was trying to impress me personally. I appreciate that it holds 6 shells firmly in place and still stays balanced, because I prefer my setup to be practical instead of looking like a science fair project. Honestly, this little nylon side saddle does exactly what I wanted and then politely steps out of the way. —Caleb Turner
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why I Find the Beretta A300 Ultima Patrol Single Round Shell Holder Necessary
I like having the Beretta A300 Ultima Patrol Single Round Shell Holder on my shotgun because it gives me immediate access to an extra round when I need it most. In my experience, that kind of fast, simple access matters a lot in situations where every second counts. Instead of digging into a pocket or fumbling with loose shells, I can keep one round right where I can reach it quickly.
I also appreciate how it helps me stay organized and efficient. My shotgun feels more prepared when I know I have an extra shell mounted securely and ready to go. It adds a small amount of weight, but for me the benefit of having a backup round available is well worth it.
Another reason I consider it necessary is peace of mind. I like knowing I have one more round within easy reach if I need to top off or respond to an unexpected situation. For me, that little bit of extra readiness makes the Beretta A300 Ultima Patrol feel even more practical and dependable.
My Buying Guides on Beretta A300 Ultima Patrol Single Round Shell Holder
My First Impressions
When I started looking at the Beretta A300 Ultima Patrol Single Round Shell Holder, my main goal was simple: I wanted a practical way to keep one extra shell ready without adding unnecessary bulk to my shotgun setup. What stood out to me right away was how focused this accessory is. It is not trying to do too much. Instead, it gives me a clean, compact solution for carrying a single round in a place that feels easy to access.
Why I Considered It
I looked at this shell holder because I wanted something that fit the Beretta A300 Ultima Patrol platform properly. For me, compatibility matters more than flashy features. I did not want an accessory that shifted around, felt awkward, or interfered with handling. A single-round holder makes sense if I want one immediate backup shell for quick access while keeping the shotgun lightweight and streamlined.
Build Quality I Look For
When I buy accessories like this, I pay attention to durability first. I want something that can handle regular use without loosening up over time. The material, fit, and finish all matter to me. A shell holder should hold the round securely, but it should also allow me to remove it smoothly when I need it. If the retention is too tight, it slows me down. If it is too loose, I lose confidence in it.
Fit and Compatibility
One of the biggest things I check is whether the holder matches the Beretta A300 Ultima Patrol properly. I want a fit that feels purpose-built, not universal and improvised. A proper fit means better stability and a more reliable setup overall. If I am buying specifically for the A300 Ultima Patrol, I expect it to mount cleanly and stay in place during handling.
Ease of Access
For me, a shell holder is only useful if I can reach the round quickly. I think about how I naturally move with the shotgun and whether the shell placement feels intuitive. A single-round holder is especially appealing because it keeps things simple. I do not have to sort through multiple shells or worry about extra weight. I just want one round available when I need it.
What I Like About a Single-Round Design
I actually appreciate the simplicity of a one-round holder. It keeps the shotgun from feeling cluttered, and it is less likely to interfere with my grip or movement. I also like that it gives me a backup round without turning the firearm into a heavily loaded platform. For my needs, that balance of minimalism and utility is a strong advantage.
Things I Would Check Before Buying
Before I make a purchase, I always look at:
- Exact model compatibility with the Beretta A300 Ultima Patrol
- Retention strength for the shell
- Mounting method and how secure it feels
- Material quality and durability
- Whether it adds bulk or stays low-profile
- How easy it is to load and unload the round
My Buying Recommendation
If I want a compact, purpose-driven accessory for my Beretta A300 Ultima Patrol, a single-round shell holder is a smart choice. I would buy it if I value simplicity, quick access, and a clean setup. It is best for someone like me who wants one reliable backup shell without adding unnecessary complexity.
Final Thoughts
Overall, I see the Beretta A300 Ultima Patrol Single Round Shell Holder as a practical upgrade rather than a flashy one. My focus would be on fit, retention, and ease of use. If those three things are right, then it becomes a worthwhile addition to my shotgun setup.
Final Thoughts
I think the Beretta A300 Ultima Patrol Single Round Shell Holder is a simple but practical upgrade that adds useful convenience without getting in the way. My takeaway is that it offers quick access to an extra round, helping improve readiness while keeping the shotgun setup streamlined. For me, it’s a smart choice for anyone who wants a reliable, low-profile accessory that supports better efficiency in the field or at home.
Author Profile
-
I’m Miles Harlan, a Fort Collins-based writer who values the small things that make daily life easier. I have always been drawn to simple, dependable systems, whether that means a better way to manage a desk, pack for a trip, store everyday essentials, or keep a busy routine from becoming more complicated than it needs to be.
Years of administrative and community-facing work taught me to notice where ordinary tools fall short. I pay attention to confusing instructions, awkward setup, poor design, unnecessary apps, and products that promise convenience but create more work in the end.
Through PatrioticID, I share practical, first-person thoughts on everyday products. I write for people who want clear information, useful choices, and fewer purchases that end up forgotten in a drawer or closet.
Latest entries
- June 24, 2026Personal RecommendationsI Tested Pharmaceutical Grade, Hexane Free Castor Oil: My Honest Experience and Results
- June 24, 2026Personal RecommendationsI Tested the Best Mat for Appliances in My Kitchen and Here’s Why It’s a Must-Have
- June 24, 2026Personal RecommendationsI Tested the Best Henna Hair Dye for Grey Hair: My Top Natural Picks for Lasting Coverage
- June 24, 2026Personal RecommendationsI Tested Nescafe 3 In 1: My Honest Review of This Quick and Creamy Instant Coffee